Using The Remote Control - Whirlpool ACQ088PV Use And Care Manual

NOTE: Remote control may differ in appearance.
NOTE: One CR2025 battery (included) powers the remote
control. Replace battery after 6 months of use, or when the
remote control starts to lose power.
Power
Press POWER to turn on the air conditioner.
Mode
Press MODE to choose Cool, Dry or Fan.
12

Using the Remote Control

6 th Sense
The air conditioner automatically selects Cool or Dry mode,
depending on room temperature and sets the temperature to
79ºF (26ºC).
The temperature set point can be adjusted down to 75ºF
(24ºC) or up to 83ºF (28ºC). Press the up or down arrow
button once to change the temperature 2ºF (1ºC) or twice to
change it 4ºF (2ºC).
If the current room temperature is lower than the temperature
set point, Dry mode is selected. Fan runs on Auto speed only.
If the current room temperature is higher than the
temperature set point, Cool mode is selected. Fan speed may
be selected by the user.
1. Press 6
2. In Cool mode, press FAN to select High, Med, Low or Auto.
RapidCool
Used for fast cooling. The air conditioner automatically sets the
fan speed to High and temperature to 64°F (18ºC).
NOTE: 6 th
RapidCool control is selected.
1. Press RapidCool
sets the fan speed to High and temperature to 64°F (18ºC).
2. To turn RapidCool
button, Mode, Fan, Power or the up arrow button.
Fan Speed
Press FAN to choose High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.
™ System Control
th Sense ™ System control.
™ Control
Sense ™ System control button does not operate when
™ control. The air conditioner automatically
™ control off, press the RapidCool control