Eureka NER E10s Instruction Manual page 12

1. Avoid placing the robot and the base under direct sunlight.
2. Be sure to keep the charging area dry.
Press and hold " " for 3 seconds to power on the robot vacuum.
After the power indicator turns on, press the recharging button or
manually put the robot back into the self-emptying base for charging,
as shown. We recommend you charge the robot for at least 6 hours
before using it for the first time.
Indicator Light
stable light
stable light
1. When the battery level is too low, the robot cannot be turned on. Please manually put the robot onto the
charging base.
2.
3. To ensure the optimal performance of the lithium-ion battery, please keep the robot charged.
4.
If you manually put the robot vacuum into the base, ensure that the charging contacts of both the robot and the
base are connected.
5.
not used for more than 3 months, allow it to get charged for at least 12 hours before using. To preserve the
battery lifespan, we suggest you fully charge the battery at least once every six months.
1) Robot is in standby mode, or
2) Cleaning in progress, or
3) Robot is fully charged.
battery level ≥ 20%, robot has
stable light
finished its mission and is going
to recharge
battery level < 20%, robot is
flash quickly
going to recharge
Robot is charging
Error has occurred, see
"Troubleshooting".
Robot is in sleep mode or
NOTES
Charging
NOTES
Status
12