Page 1
NEU180 series Upright vacuum cleaner; household type Owner’s Guide Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this owner’s guide. If you have questions about your new vacuum,...
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated and sealed. Motor www.eureka.com...
What comes in the carton Important safeguards Vacuum cleaner Dusting brush Upholstery tool Crevice tool Handle Eureka Customer Service HELPLINE 1-800-282-2886...
Store dusting brush, upholstery cleaner. Push down until it clicks. tool and crevice tool on back of vacuum cleaner. Loop hose over hose retainer. Push loose end of hose securely Wrap cord onto upper and lower onto hose inlet. cord wrap. www.eureka.com...
Empty dust cup after every use Step on handle release to lower Press release button and lift To empty debris, press lever handle into position for vacuuming off dust cup. to release bottom lid. floors. www.eureka.com...
Crevice tool – Use for baseboard Dusting brush – Use for furniture, Upholstery tool – Use for furniture, edges, corners, detailing chairs, sofas, drapes, blinds, drawers and vents. chairs, sofas and mattresses. dryer vents and tight spaces. Eureka Customer Service HELPLINE 1-800-282-2886...
Click Align tab on filter screen with slot on Reinstall foam filter. Close cover until it clicks. back of cup and drop into position. Warning: Never operate vacuum cleaner without foam filter and filter screen in proper position. www.eureka.com...
• Remove dust cup. • Use finger to check for debris in air path (Fig. 4). • Reinstall filters inside dust cup and position dust cup onto vacuum cleaner. Eureka Customer Service HELPLINE 1-800-282-2886...
• Step on handle release to lower handle. • Turn vacuum face down on floor. • To avoid unnecessary service calls, check brushroll for debris. • Use scissors to clip heavy threads or strings. www.eureka.com...
(Fig. 5). Press right end of brushroll into position. • To replace brushroll cover, align slot on cover with tab (Fig. 6) and snap cover into place. Replace 6 screws (Fig. 7). Eureka Customer Service HELPLINE 1-800-282-2886...
If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum. 3) After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, call the Eureka customer service helpline. Problem Solution •...
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall the manufacturer be liable for any consequential or Eureka will, at its option, repair or replace a defective What Eureka will do incidental damages you may incur in connection with vacuum or vacuum part that is covered by this your purchase or use of the vacuum.