Table of Contents
Advertisement
To remove the processor carrier assembly from the PHM, please follow the steps below:
5. Use your hand to detach the four plastic clips (marked a, b, c, d) on the processor carrier assembly from
the four corners of the heatsink (marked A, B, C, D), as shown below.
6. When all plastic clips have been detached from the heatsink, remove the processor carrier assembly
from the heatsink.
7. Unlock the lever from its locked position and push it upwards to disengage the processor from the
processor carrier, as shown below right.
9.1
13
Advertisement
Table of Contents
