Roof Vented Installation - Kenmore 721.80002 Installation Instructions Manual

STEP 3: PREPARE THE VENTING BLOWER
ROOF VENTED INSTALLATION
1. Remove one blower unit mounting screw and two
blower plate screws. Remove the blower plate
from cabinet. See Figure 18.
(| Blower plate
2. Carefully lift the blower unit out of the microwave
oven.
3. Rotate blower unit 90° so the exhaust ports face
Blower plate i
the top of the cabinet. See Figure 19. P Blower unit
mounting screws
4. Place blower unit back into microwave oven. Figure 18
5. Use side cutters or tin snips to cut and remove
knockouts "A" from blower plate.
Discard knockouts. Be careful not to distort the
plate. See Figure 20.
Ae
2
aa
()
Z
ve
6. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the two blower plate mounting screws.
See Figure 21.
Blower unit
Figure 19
Knockots "A"
Blower plate
Figure 20
Blower unit
Blower plate
mounting screws
Blower plate Blower unit
mounting screws
Figure 21
12