Kenmore 721.80002 Installation Instructions Manual page 4

Ae
2
aa
()
Z
ve
YOUR SAFETY FIRST
¢ MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.
- Mount the oven against a flat, vertical wall, so that it is supported by the wall. The wall should be
constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or plaster /lath.
- ATTACH AT LEAST ONE of the two lag screws supporting the oven to a vertical, 2" x 4" wall stud.
- DO NOT mount the microwave oven to an island or peninsula cabinet.
- BE SURE the upper cabinet and rear wall structures are able to support 150 Ibs., plus the weight of
any items you place inside the oven or upper cabinet.
- Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.
- BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.
If you do not mount the oven as instructed, you risk personal injury and/or
property damage.
UL Grounded Plug
(inside upper cabinet)
ew
Power Supply
30" min. cabinet opening width Cord Hole
||
30" min. clearance from bottom | | ——___________
of cabinet to cooking surface or ~--~~__
countertop
(Use templates included with
installation instructions)
CoO Cc >
oa) | | Cet) | | Come)
Figure 4
Before you begin installing the oven, PLACE A PIECE OF THE CARTON OR OTHER HEAVY MATERIAL
(a blanket) over the countertop or cooktop fo protect it. Do net use a plastic cover.
Failure to protect these surfaces could result inproperty damage.