Pantum CM9106 Series User Manual page 4

Safety Warning
Please note the following safety warnings before using the printer:
Warning
There is high-voltage electrode inside the printer. Before
cleaning the printer, make sure the power is turned off!
Plugging and unplugging the power cord plug with a wet
hand can result in an electric shock.
The fuser unit is hot when and after printing. Touching the
fuser unit (the shaded area as shown) may cause burns!
The fuser unit is attached with a high temperature warning
label. Please do not remove or damage this label.
Such symbol represents it is an electrostatic sensitive
component. Do not touch any area close to the symbols
before touching the metal surface in an area away from
the symbols.
III