Page 4
Chapter 4— AT Commands, S-Registers, & Result Codes ..Chapter 5— Warranty, Service, and Tech Support ....Appendix A— Regulatory Information ........Index ..................116...
Page 12
ISI5634PCI/4/8 User Guide Introduction Safety Warnings Telecom Hardware Installation Procedures Installing the ISI5634PCI card WITHOUT the auxiliary module:...
Page 52
ISI5634PCI/4/8 User Guide COPY A:\NOVELL\AIOISIX.NLM F:\SYSTEM LOAD AIOISIX Configuring Ports for NetWare Connect Removing the Driver (Novell) SCO Open Server 5 Driver Installation...
Page 53
Chapter 3—Software/Driver Installation To install from CD-ROM: # mount -r /dev/cd0 /mnt # cd /mnt # cd servcard/drivers/sco50x #cp sco50x.tar / # cd To format a floppy disk for SCO5: To untar the driver file and copy files onto floppy disk: # mkdir /isi # cp sco50x.tar /isi # cd /isi...
Page 54
ISI5634PCI/4/8 User Guide # cd /isi/unifiedinstimg301 #scosh # scosh To install driver from floppy disk...
Page 56
MultiTech’s serial cards, pseudo devices have to be created in your /dev directory. These devices are system-wide resources. Enter the number of pseudo-devices to be created for the use of Multi_View utility (1 - 256).
Page 57
Chapter 3—Software/Driver Installation ISICOM. The default prefix for the tty ports is ttyl. The default prefix for the printer is prnl. Is this acceptable? (y/n/...
Page 58
ISI5634PCI/4/8 User Guide You have chosen the following setup The tty prefix is ttyl. The printer prefix is prnl. Number of Multi_View pseudo devices [ user-specified number ]. Press <Enter> to continue Installation complete Host Exit shutdown -g0-y init 6...
Page 59
Chapter 3—Software/Driver Installation usr/lib/uucp/Devices ttylbx ttyl2A ACU ttylbX - 9600 dialer name b, X dialer-name enable ttylbx...
Page 60
ISI5634PCI/4/8 User Guide ttyl1a ttyl1A disable ttyl1a enable ttyl1A Linux Driver for ISI5634PCI-4/8 LINUX: Pre-Installation Issues...
Page 61
Chapter 3—Software/Driver Installation LINUX: Copying the driver from the media LINUX: Copying and untarring the driver from CD-ROM mount -r /dev/cdrom cd /mnt/cdrom tar vxf /tmp LINUX: Copying and untarring the driver from a floppy...
Page 62
ISI5634PCI/4/8 User Guide Steps for copying the driver from a floppy: mount -t ext2 /dev/fd0 /mnt/floppy mkdir /isi cd /isi cp /mnt/floppy/kernel_2.2.x/* /isi tar xvf isilinux.tar LINUX: Driver installation and loading cd /isi /Install cat/proc/ioports...
Page 64
ISI5634PCI/4/8 User Guide minicom 1a LINUX: TTY Devices Created by the Drivers: ttyMxy cumxy ttyM ttyMxy cumxy - /dev/ttyM1a TO /dev/ttyM1p - /dev/ttyM2a TO /dev/ttyM2p - /dev/ttyM3a TO /dev/ttyM3p - /dev/ttyM4a TO /dev/ttyM4p - /dev/ttyM1a TO /dev/ttyM1d - /dev/ttyM2a TO /dev/ttyM2d...
Page 65
Chapter 3—Software/Driver Installation - /dev/ttyM4a TO /dev/ttyM4h Devices mapped for modem cards (ISI5634PCI-4 and ISI5634PCI-8 cards): - /dev/ttyM1a /dev/ttyM1d - /dev/ttyM1a /dev/ttyM1h LINUX -- Dial-in configuration: M2c:12345:off:/sbin/mgetty ttyM2c LINUX -- PPP setup:...
Page 67
Chapter 3—Software/Driver Installation rm ttyM1 rm ttyM2 rm ttyM3 rm ttyM4 RedHat Linux 6.2/7.0 RPM Drivers for ISI5634PCI-4/8 Server Cards LINUX-RPM: Pre-Installation Issues LINUX-RPM: Copying the driver from the media LINUX-RPM: Copying the driver from CD-ROM mount -r /dev/cdrom /mnt/cdrom cd /mnt/cdrom...
Page 68
ISI5634PCI/4/8 User Guide LINUX-RPM: Copying the driver from a floppy mcopy a:isicom-1.1-3.src.rpm <destination folder> mcopy a:isicom-1.2-3.src.rpm <destination folder> Steps for copying the driver from a floppy: mount -t ext2 /dev/fd0 /mnt/floppy mkdir /isi cd /isi mv isicom.o isicom.original...
Page 97
Chapter 4—AT Commands, S-Registers, Result Codes...
Page 98
ISI5634PCI/4/8 User Guide S48=7 S48=128 LAPM or hangup Do not use S36=0, 2 LAPM or async Async S36=1, 3 LAPM, MNP, or hangup MNP or hangup S36=4, 6 LAPM, MNP, or aysnc MNP or async S36=5, 7...
Page 99
Chapter 4—AT Commands, S-Registers, Result Codes Result Codes...
Need help?
Do you have a question about the ISI5634PCI/4/8 and is the answer not in the manual?
Questions and answers