2.6 INFORMATION MENU.
By pressing the "Info" button (4), the "Information menu" is
activated for at least 1 second, displaying some boiler operating
parameters.
Press the "Info" button (4) to scroll the various parameters.
To exit the menu, press the "Info" button (4) up to the end of
the list, or by pressing the "Reset" button (3) or by waiting for
15 minutes.
With the menu active, the indicator (14) will alternately show
the indication of the parameter via the letter "d" plus the num-
ber of the parameter that is being displayed and the value of the
parameter itself.
Id
Parameter
d1
Displays the flame signal (uA x 10 approximate)
d2
Displays the primary exchanger output instant heating flow temperature
d3
Displays the instant output temperature from the DHW exchanger
d4
Displays the values set for central heating set
d5
Displays the values set for DHW set
Displays the external temperature (if external probe present)
d6
If the temperature is below zero, the value is displayed flashing
d7
Display the temperature of the inlet DHW (with DHW inlet probe present)
d8
Return probe temperature
Displays the list of the last five anomalies
d9
(To scroll the list, turn the CH temperature selector (6))
Description
45