Trinkwarmwasser / Domestic Hot Water - Danfoss VXe SLS Mounting And Installation Manual

Table of Contents

Advertisement

Available languages

Available languages

Montage- und Betriebsanleitung / User manual
VXe SLS
13. DOMESTIC HOT WATER
General information
PLEASE NOTE! Some models may have a slightly different appearance,
but the control function is in principle the same as described below.
Domestic hot water
The VXe SLS is supplied with connection pipes for storage charging
cylinder on the secondary side.
DHW heating takes place according to the storage charging princi-
ple, - cold water is heated to the desired value via the heat exchanger
and loaded in the storage tank via a factory installed circulation
pump.
The substation is fittet with a heat exchanger types XB 06H-26 on
the DHW side.
The DHW temperature is regulated by an electronic actuator/control
valve, which is connected to the Danfoss ECL, including an immer-
sion sensor for installation in the storage cylinder.
Fig. 2
Fitting of heat meter
In the cylinder return line the substation is equipped with 3/4" filling
piece for fitting of a heat meter
Calculator of the heat meter can be mounted into a special cham-
ber, that is designed for easy reading.
Fig. 1
DHW
Danfoss ECL Comfort 310
Fig. 3
The application Key contains information about application, lan-
guage and factory settings, adapted to the type of system, for which
it is ordered.
Note! Various applications can be loaded.
The controller is factory-set for local language and the running time
for the actuator (DHW circuit) is preset for the actual application.
General controller settings such as "Time and Date" must be entered
during commissioning of the controller. And also the desired DHW
temperature must be set.
(Make sure that the immersion sensor is placed correctly before
making adjustment of the temperature).
Please refer to the enclosed manufacturer instructions for the ECL
210/310 controller in order to set the required domestic hot water
temperature in the DHW cylinder circuit:
ECL Application Key Box with ECL Comfort 210/310 user guide
and mounting guide, for further information.
We recommend that your order commissioning of the controller with
your local Danfoss Sales Company.
AQ40514397064001-000101
145X2068
© Danfoss | Produced by Danfoss Redan A/S | 2022.03 | 23

Advertisement

Table of Contents
loading

Table of Contents