Table of Contents
Advertisement
During loading the following display is shown
(default display)
MAIN VIEW
LOADED
7.2
1286h
1424RPM
40%
The controller controls the speed of the engine in
order to meet the requested working pressure, at the
most economical fuel usage.
Active Buttons
PRESSURE SETTING
To change the pressure setting there are two
possibilities.
1. Choosing between presets
The operator can choose between two preset
pressures.
MAIN VIEW
LOADED
7.2bar
40%
The current active preset is indicated in the top
right corner of the display: 1 or 2. To switch to the
other preset, go to the Main view and press the
enter button for 2 seconds (the pressure set point
will light up in green).
MAIN VIEW
LOADED
40%
7.2
1286h
1424RPM
7.2bar
7.2
1286h
1424RPM
7.2bar
- 42 -
By pressing the left or the right arrow button the
operator will be notified to:
"Press enter to go to other pressure setting X Y"
When enter is pressed the setting will become
active.
By pressing enter again the controller will go out
of edit mode.
The active preset presure (1 or 2) will be visible in
the top right corner of the display.
Advertisement
Table of Contents
