Atlas Copco XATS 138 PE Stage V APP Instruction Manual page 37

ECU
READY TO LOAD
Fuel rate
Engine coolant temp.
Engine inlet temperature
Engine oil pressure
Engine fuel pressure
Engine boost pressure
40% 69h 1399RPM
The second page contains engine related data.
 Fuel rate
 Engine coolant temperature
 Engine fuel temperature
 Engine oil temperature
 Engine inlet temperature
 Engine boost pressure
 Engine load
 Engine rpm
 Rpm setpoint
 Ambient temperature
Settings View
SETTINGS
LOADED
1000 GENERAL SETTINGS
2000 DIGITAL INPUTS
4 l/h
3000 VOLTAGE INPUTS
87°C
4000 TEMPERATURE INPUTS
30°C
5000 RELAY OUTPUTS
2.6 bar
5300 SEMICONDUCTOR OUTPUTS
4.1 bar
6000 SYSTEM SETTINGS
1.2 bar
40%
In the settings view the operator can view and change
(depending on the authorisation level) various
parameters.
Use the up and down navigation buttons to scroll
through the full list of settings.
Use the enter button to enter the selected submenu.
Use the back button to leave the entered (sub) menu.
1286h 1300RPM 22.4bar
- 37 -
Alarm View
ALARMS
LOADED
3450 BATTERY LOW ALARM
2070 COOLANT LEVEL LOW
3010 FUEL LEVEL LOW
ECU DM1 LIST
ECU DM2 LIST
EVENT LOG LIST
ALARM LOG LIST
40% 1286h 1300RPM
In the alarm view the operator can view the various
alarms, actual and history.
Use the up and down navigation buttons to scroll
through the full list of alarms.
Use the left and right navigation buttons to scroll
through the different Alarm pages:
 General Alarms
 Alarm Log
 DM1 List
 Event Log
 DM2 List
22.4bar