Johnson Controls Quantech Millennium QCC3080CZE Installation Operation & Maintenance page 108

SECTION 6: COMMISSIONING
Record the suction temperature, suction pressure, suc-
tion saturation temperature, and superheat of each system
below:
Suction temp. = _______ _______ °F
Suction Pressure = _______ _______ psig
Saturation temp. = _______ _______ °F
Superheat = _______ _______ °F
E. LEAK CHECKING
Leak check compressors, fittings, and piping to ensure
no leaks. ....................................................................
If the unit is functioning satisfactorily during the initial oper-
ating period, no safeties trip and the compressors cycle to
control water temperature to setpoint, the chiller is ready to
be placed into operation.
Quantech Incorporated
Copyright © 2023
Form QCC3-CL2 (1123)
Issue Date: November 10, 2023
Supersedes: QCC3-CL2 (417)
108
SYS 1 SYS 2
www.Quantech-HVAC.com
FORM QCC3-NM1
ISSUE DATE: 12/19/2023
Form QCC3-CL2
Issue date: 11/10/2023
Subject to change without notice. Printed in USA
All Rights Reserved
Quantech