Completing Interface 2 (Dmz) Entries - Watchguard Firebox V10 Installation Manual

If you are configuring PPPoE access, be sure to direct the appliance user
to the printed instructions on how to change their PPPoE access user
name and password, if they would like an additional measure of security.

Completing interface 2 (DMZ) entries.

To configure interface 2 (usually used for mixed-access, DMZ
connections), follow these steps:
1
Installation Guide
Click DHCP
Click PPPoE
Click in the IP Address field and type the correct entry.
When the Installation Wizard appears
If this appliance is assigned an IP address by a
DHCP server.
Click in the now-visible Host ID field and type the
relevant information, if provided by the ISP. (This
entry is optional.)
If this appliance is assigned an IP address by an
ISP using PPPoE for connection.
Click in the User Name and both Password text
fields and type the appropriate entries (as
assigned to this user by the ISP).
N
OTE
55