Key Features Of The Firebox Vclass 100 Appliance - Watchguard Firebox V10 Installation Manual

CHAPTER 1: A Tour of the WatchGuard Firebox Vclass Security Appliances
IN THE EVENT OF A POWER FAILURE... This security appliance, if
left connected to the power source, will automatically restart itself once
electrical power has been restored. You do not have to press either the
Power button on the front or the power supply switch on the back of the
appliance.

Key features of the Firebox Vclass 100 appliance

The front panel of the Firebox Vclass 100 security appliance contains the
features shown in the following illustration.
12
Two Gigabit Ethernet interfaces Labeled 0 and 1
Three LEDs per interface
Two Ethernet interfaces
Three status LED's
One RJ-45 interface
One LED
One pin-hole port
N
OTE
Labelled RX, TX and Link
Labeled HA1 and HA2 (High
Availability)
Labeled Alarm, Admin and Ready
Labeled Console
Labeled Power
Labeled Reset
Vcontroller 3.2