CHAPTER 3: Starting the Firebox Vclass Appliance Setup
If no appliance is found
If no appliances were found, a Devices Not Found dialog box appears.
1
2
40
Review the message in this dialog box, then inspect your appliance for
the following indicators:
- Make sure the appliance has been properly connected to the
network.
- Verify that all connections are secure.
- Make sure that the appliance has been fully powered up. Look
especially for the Ready LED to be steadily lit.
Click Find Again (in the Devices Not Found dialog box) to attempt
another discovery.
Vcontroller 3.2