Refuelling - Fayat Group BOMAG BW 202 AD-50 Service Manual

General – Concerning your safety
1.2.7.8 Working with the precision spreader
1.2.7.9 Parking the machine

1.2.8 Refuelling

28
Pay attention to the maximum filling capacity, as otherwise the per-
missible total weight may be exceeded.
Do not step between precision spreader and machine while the
engine is running.
Always empty the precision spreader before mounting or removing
it.
Loads must only be attached and hoisted by an expert / qualified
person.
Do not use damaged or in any other way impaired lifting points.
Use only lifting and lashing tackle with sufficient load bearing
capacity for the weight to be loaded.
Fasten the lifting gear only at the specified lifting points.
Always use appropriate lifting and lashing tackle on the lifting and
lashing points.
Use lifting tackle only in the prescribed direction of load application.
Lifting tackle must not be damaged by components of the precision
spreader.
Danger to the life of persons if they step or stand under a sus-
pended load.
When lifting the machine, avoid uncontrolled movements of the
load. If necessary, hold the load with guide ropes.
Always park the precision spreader on level and firm ground.
Park the machine on horizontal, level, firm ground.
Before leaving the machine:
n
shift all control levers to "Neutral position", "Off" or "0",
n
apply the parking brake,
n
shut down the engine, pull off the ignition key,
n
pull off the main battery switch,
n
secure the machine against unauthorized use.
Do not jump off the machine, but use hand grips and access steps.
Mark machines, which could be in the way, with a clearly visible
sign.
When parking on ascents or descents use appropriate means to
secure the machine against rolling.
Do not inhale any fuel fumes.
Refuel only with the engine shut down.
BW 202 AD-50 / BW 206 AD-50 / BW 202 ADO-50