Fayat Group BOMAG BW 202 AD-50 Service Manual page 27

1.2.7.4 Cross slope
Fig. 6
1.2.7.5 Cross slope
Fig. 7
1.2.7.6 Working with vibration
1.2.7.7 Working with vibration/oscillation
The tipping angle was measured statically on level, hard ground
with the machine stopped and without steering.
The max. permissible inclination of the machine may be limited by
the max. permissible slanted position of the engine.
The specified angle must not be exceeded.
With loose soil, acceleration/deceleration, running vibration,
steering or attached accessories the tipping angle may be consid-
erably lower.
Driving across slopes should therefore be strictly avoided, because
of the high risk of tipping over and the related risk of severe or
even fatal accidents.
The tipping angle was measured statically on level, hard ground
with the machine stopped and without steering.
The max. permissible inclination of the machine may be limited by
the max. permissible slanted position of the engine.
The specified angle must not be exceeded.
With loose soil, acceleration/deceleration, running vibration(oscilla-
tion, steering or attached accessories the tipping angle may be
considerably lower.
Driving across slopes should therefore be strictly avoided, because
of the high risk of tipping over and the related risk of severe or
even fatal accidents.
When compacting with vibration you must always check the effect
of the vibration on nearby buildings and underground supply lines
(gas, water, sewage, electric power). If necessary stop compacting
with vibration.
Do not activate the vibration on hard (frozen, concrete) ground.
Components may get damaged.
When compacting with vibration/oscillation you must always check
the effect of the vibration on nearby buildings and underground
supply lines (gas, water, sewage, electric power). If necessary stop
compacting with vibration/oscillation.
Do not activate the vibration/oscillation on hard (frozen, concrete)
ground. Components may get damaged.
BW 202 AD-50 / BW 206 AD-50 / BW 202 ADO-50
General – Concerning your safety
27