Table of Contents
Advertisement
General – Concerning your safety
1.2.5 Working on heating elements
1.2.6 Cleaning work
16
Do not wear jewellery (watch, bracelets, etc.) when working on the
battery.
The connection cables of the battery must not touch or rub against
machine parts.
Danger to life! High voltage 230/400 Volt!
Work on the electric heating system must only be carried out by
persons who have been trained for these activities.
Heating elements must only be changed with the engine shut down
and the main battery switch pulled out.
The heating elements become very hot during operation. Allow to
cool down to an appropriate level before disassembling the heating
elements.
After replacing a heating element you should generally perform an
insulation and PE-conductor measurement!
Be extremely cautious when performing cleaning work with the
engine running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with steam cleaning equipment do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
it beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
BF 700 C-2
Advertisement
Table of Contents
