Safescan 2265 User Manual page 19

Adjusting counterfeit detection settings
Your banknote counter has already been pre-configured with the
optimal detection settings for this type of banknote counter. On rare
occasions it could be required to manually adjust the sensitivty of
one or more counterfeit detection settings.
Note: Only adjust these settings when being advised to do so by
a Safescan technical expert.
To change the detection settings:
1. Press the DETECT button for 3 seconds to open the Dectection
Settings mode. The first available setting (UV) starts blinking.
On the display the current level setting is shown.
2. To move to another detection type, press
desired detection type has been reached.
3. Press START/OK to change the level. 2 arrow indicators next to
the current level setting will start blinking.
4. Press the
5. Press START/OK to comfirm the detection level and return to the
count screen.
Note: Press [CLR] to cancel and return to count screen at any
time during this process.
More info, articles, tutorials and videos at: support.safescan.com
or buttons to set a new detection level.
or until the
BATCH
MODE
DETECT
English
START
OK
CLR
19