Table of Contents
Advertisement
Connecting to a
UX102 or UX112
PIN Pad
Figure: 7 Connecting
to a UX102 or
UX112 PIN
Pad
Connecting
UX402 CTLS
Antenna
C
onnecting
UX302 to UX402
The UX302 can be connected to a UX102 or UX112 PIN Pad device with a
Verifone USB Type A to Type C cable.
Connect the Type A plug to the UX302 USB port and connect the Type C
plug to the USB port of the UX112. Use the same procedure for connecting
the UX102 PIN Pad.
UX302 is connected to a UX402 contactless unit using an RJ45 cable (VPN
CBL159-314-01-B) and an SMA cable (VPN CBL159- 302-03-A).
Before you continue the installation process, review the features of the
UX402 (see
Figure 10
1
Connect one end of the RJ45 connector to the UX302 and the other end to the
UX402. Make sure both devices are not more than 0.5 m away from each other.
Installation Guide
and
Figure
11).
UX302 and UX402
13
© VeriFone, Inc. All rights Reserved.
Advertisement
Table of Contents
