Cable Connections; Connecting To A Ux-Series Host Device; Connecting To A Ux-Series Peripheral Device; Connecting To Other Optional Devices - VeriFone UX300 Installation Manual

Cable
Connections
NOTE
Connecting to a UX-
Series Host Device
The device's rear panel has various interface ports for power and communication
connections to controlling and peripheral devices. This section discusses these
various connections.
The UX300 card reader/control unit connects to the various UX-series units, as
well as other devices.
This section discusses how to connect to each of the units:
•

Connecting to a UX-Series Host Device

•

Connecting to a UX-Series Peripheral Device

•

Connecting to Other Optional Devices

To attain or replace connection cables, see
This section discusses the connection of the UX300 device with the following host
units:
•
Connecting to a Vending Machine
•
Connecting to a UX200 Media Display Host Unit
•
Connecting to a PC
Connecting to a Vending Machine
The UX300 unit is designed to connect to a host vending machine. Connect to a
host VM, through any of one of these four connection types:
•
MDB
•
USB Type B
•
ETH (LAN)
•
COM (RS-232)
Connect the appropriate cable to the UX300 unit and the other end to the vending
machine.
Connecting to a UX200 Media Display Host Unit
The UX300 unit is designed to connect to the host UX200 media display. Connect
to the display through any one of these two connection types:
•
USB Type B
•
ETH (LAN)
Accessories and
UX300 M C R
ANUAL ARD EADER
S
ETUP

Cable Connections

Documentation.
I G
NSTALLATION UIDE
17