Table of Contents
Advertisement
2. Device Setup
This chapter describes the setup for the UX302 card reader and UX402, under the following
sections:
Selecting the
Unit Location
Choosing the
Mounting
Location
Unpacking the
Shipping
Carton
•
Selecting the Unit Location
•
Unpacking the Shipping Carton
•
Examining the Features of the Unit
•
Service Switch
•
Cable Connections
•
Mounting the Device
•
Grounding the Unit
•
Connecting the Power Supply
Use the following guidelines when selecting a location for your device.
•
Select a location convenient for the customer.
•
To minimize data reading or writing errors, pick a location free from magnetic
interference.
Choose a mounting location that ensures the card slot is in full view of the
cardholder during card insertion.
The UX302 meets the Ingress Protection (IP34) standards for outdoor installation
environments. If greater protection is required, consider adding additional
protection features to the enclosure it is mounted in.
Open the shipping carton and carefully inspect its contents for possible
tampering or shipping damage.
Installation Guide
UX302 and UX402
8
© VeriFone, Inc. All rights Reserved.
Advertisement
Table of Contents
