Table of Contents
Advertisement
Figure: 8 Connecting
UX302 to a
UX402 CTLS
Unit
Mounting the
Device
Instructions for
Mounting the
Unit
2
Connect one end of the SMA cable to the UX302 and the other end to the
UX402 unit.
3
Hold the cable and tighten the body.
4
SMA connecter should be tightened by hand only.
Use the following procedure to mount the UX302 to a suitable mounting
surface.
Make sure that your mounting frame has a thickness of 2 mm.
Assurez-vous que votre cadre de montage a une épaisseur de 2 mm.
Two mounting positions are listed below along with the illustrations.
•
Ideal Mounting Position with -5 forward degree tilt.
Installation Guide
UX302 and UX402
14
© VeriFone, Inc. All rights Reserved.
Advertisement
Table of Contents
