Working With Application-Specific Settings; Intuos3 Lens Cursor - Wacom INTUOS 3 User Manual

INTUOS3 LENS CURSOR

Available for use with 12x12 / A4 Oversize and 12x19 / A3 Wide tablet models, the lens cursor is an ideal
tool for entering precise coordinate position information into your computer. The lens cursor reports the
position of the cross-hair to the computer. This makes the lens cursor especially useful for digitizing
drawings into graphics and CAD applications.
The middle button is
set to M C
IDDLE LICK
by default.
The left button is set to
C by default, and is
LICK
the primary button used
for selecting.
Working with application-specific settings
Contents
Index
Rotate lens for best viewing angle.
Lens cursor equipped with programmable buttons.
The default setting for the Intuos3 lens cursor is M
to move the screen cursor with a "pick up and slide" action similar to using a
traditional mouse. When using the lens cursor to digitize a drawing, the lens
cursor must be set to P
Important: When the lens cursor is not in use, place it on your
desk. Leaving an Intuos3 tool on the tablet may interfere with
screen cursor positioning when using other pointing devices.
For order information on this and other available Intuos3 tools, see ordering
parts and accessories.
Contents Index
The right button is set to R
displays a context menu when pressed.
The left and right side rear buttons are set for B
F functionality within your Internet browser.
ORWARD
mode.
EN
Mouse mode settings
C by default, and
IGHT LICK
ACK
mode, enabling you
OUSE
74
and
74