Basic Setup - Axis P1455-LE-3 User Manual

AXIS P1455-LE-3 License Plate Verifier Kit
Get started
Get started

Basic setup

These setup instructions are valid for all scenarios:
1. Camera mounting recommendations on page 3
2. Setup assistant on page 5
3. Adjust the area of interest on page 8
4. Select region on page 10
5. Set up event storage on page 10
Camera mounting recommendations
• When you select the mounting location, remember that direct sunlight can distort the image, for example, during sunrise
and sunset.
• The mounting height for a camera in a Access control scenario should be half of the distance of that between the
vehicle and the camera.
• The mounting height for camera in a Free flow (slow traffic license plate recognition) scenario should be less than half of
the distance of that between the vehicle and the camera.
Access control capture distance: 2–7 m (6.6–23 ft). This example is based on the AXIS P3265–LVE-3 License Plate Verifier kit.
Capture distance: (x)
2.0 m (6.6 ft)
3.0 m (9.8 ft)
4.0 m (13 ft)
Mounting height (y)
1.0 m (3.3 ft)
1.5 m (4.9 ft)
2.0 m (6.6 ft)
3