Axis P1455-LE-3 User Manual page 23

AXIS P1455-LE-3 License Plate Verifier Kit
Vehicle access control scenario
Requirements:
• Camera and door controller physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• AXIS Camera Station client version 5.49.449 and up.
• Basic setup done. See Basic setup on page 3 .
In AXIS Camera Station, see Add a reader.
In the AXIS License Plate Verifier app:
1. In the Settings tab, go to Configuration wizard and click Start.
2. Select Access Control.
3. Select Secure Entry, and click Next.
In AXIS Camera Station:
4. Type the IP address of the door controller, available in the device list in AXIS Camera Station > Configuration > Other
Devices.
5. To add a Authentication key, go to AXIS Camera Station > Configuration > Encrypted communication.
6. Go to External Peripheral Authentication Key and click Show authentication key.
7. Click Copy key.
In the AXIS License Plate Verifier app:
8. Go to Authentication key in the configuration wizard and paste the key.
9. Click Connect.
10. Select the Door controller name in the drop-down menu.
11. Select the Reader name in the drop-down menu.
12. Check Turn on integration.
13. Click Next.
14. Adjust the area of interest. See Adjust the area of interest on page 8 .
15. Click Next twice and then Finish.
23