Axis P1455-LE-3 User Manual page 21

AXIS P1455-LE-3 License Plate Verifier Kit
Vehicle access control scenario
Hardware configuration in AXIS Entry Manager
1. Go to AXIS Entry Manager and start a new hardware configuration under Setup.
2. In the hardware configuration, rename the network door controller to "Gate controller".
3. Click Next.
4. In Configure locks connected to this controller, clear the Door monitor option.
5. Click Next.
6. In Configure readers connected to this controller, clear the Exit reader option.
7. Click Finish.
Configuration in AXIS License Plate Verifier
1. Go the AXIS License Plate Verifier webpage.
2. Go to the Settings > Access control.
3. Go to Type and select Controller in the drop-down list.
4. Enter the following information:
- the IP address for the controller in format 192.168.0.0
- the username for the controller
- the password for the controller
5. Click Connect.
6. If the connection is successful, "Gatecontroller" shows up in the Network Door Controller name drop-down list. Select
"Gatecontroller".
7. In the Reader name drop-down list, select the reader connected to the door "Gatecontroller", for example "Reader
entrance". These names can be changed in AXIS Entry Manager.
8. To activate the connection, select Turn on integration.
9. Enter one of the user's license plate number, or use the default, in the test field and click Test integration. Check that the
test was successful.
Configure users, groups, doors, and schedules in AXIS Entry Manager
1. Go to AXIS Entry Manager.
2. Go to Access Management.
3. Go to Doors > Add identification type.
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=70394&section=connect-to-a-door-controller
How to get the application up and running with AXIS A1001 Door Controller.
21