Axis P1455-LE-3 User Manual page 9

AXIS P1455-LE-3 License Plate Verifier Kit
Get started
Adjust the area of interest
The area of interest is the area in the live view where the application looks for license plates. For optimal performance, keep the
area of interest as small as possible. To adjust the area of interest, do the following:
1. Go to Settings .
2. Click Edit area of interest.
3. To improve verification and captured images, go to Zoom and adjust the slider to your needs.
4. To have the camera automatically focus on the vehicles, click Autofocus. To set the focus manually, go to Focus and
adjust it with the slider.
5. To move the area of interest, click anywhere in the area and drag it to where the license plates are most visible. If you
place the area of interest outside the live view, it will automatically jump back to default position. Make sure the region of
interest stays in position after you have saved the settings.
6. To adjust the area of interest, click anywhere in the area and drag the anchor points highlighted in blue.
- To reset the area of interest, right click within the area and select Reset.
- To add anchor points, click the on one of the yellow anchor points. The anchor point will turn blue, showing it
can be manipulated. New yellow points are automatically added next to the blue anchor point. The maximum
number of blue anchor points is eight.
7. Click anywhere outside the area of interest to save your changes.
8. To get the correct direction feedback in the Event log, you need to turn the arrow to match the driving direction.
8.1 Click the arrow icon.
8.2 Select the anchor point and rotate the arrow so it aligns with the driving direction.
8.3 Click outside the area of interest to save the changes.
Note that one area can detect plates in both directions. The direction feedback shows up in the Direction column.
• To add a second area of interest, select 2 in the Area of interest drop-down menu.
9