Advertisement
EN
Mounting PipeFeeder
1.
Mount the PipeFeeder to the MultiFrame with included mounting materials
as shown in figure 7.
2.
Make sure the bottom of the PipeFeeder is level with the top of the feed
trough.
3.
In order for the PipeFeeder to dose nicely into the feed trough, it advisable
to rotate the PipeFeeder tube 45° so that the dosing unit hangs above the
feed trough.
Please note! If the stainless steel pipe of the PipeFeeder is rotated in relation to
the plastic part, care must be taken to re-adjust the PipeFeeder to maintain the
anti-spill function. To adjust the PipeFeeder, see manual 001-847-000.
If the PipeFeeder does not fit the frame due to a truss construction, etc. gets in
the way, the PipeFeeder can also be mounted on the wall. The distance between
the wall and the PipeFeeder remains the same compared to mounting on the Mul-
tiFrame. This ensures that all PipeFeeders are attached in a straight line and that
the parlour look sleek.
MultiFrame degree positions
The MultiFrame for 30° positions concerns the complete frame as described above.
This frame is supplied without a side fence. In 40°, 50° & 60° milking parlours the
frame can be fitted with a short side fence (art. no. 007-504-000). In 70° & 80° par-
lours the MultiFrame can be fitted with a long side fence (art. no. 007-505-000).
Hanskamp AgroTech BV (the Netherlands)
40° & 50°
60°
007-504-000
3 - 8
www.hanskamp.nl/en
MultiFrame
075-000-000
70°
80°
007-505-000
7
8
Advertisement
