Host A Meet Me Conference On Your Analog Phone; Shared Lines On Your Analog Phone - Cisco ATA 191 User Manual

Host a Meet Me Conference on Your Analog Phone

Procedure
Step 1
While on an active call, perform a hook flash.
This puts the call on hold and you hear dial tone.
Step 2
Dial a second number and wait until that person answers.
Step 3 To create the conference, perform a hook flash.
You are now in a conference with both persons.

Host a Meet Me Conference on Your Analog Phone

This feature allows you to host a Meet-Me conference in which other participants call a predetermined number
at a scheduled time.
Procedure
Procedure
Step 1 Pick up the phone handset.
Step 2
Press **5 > room ID > #.
Step 3
Other parties can join a Meet-Me conference by dialing the meeting number directly.

Shared lines on your analog phone

You can share the same phone number with one or more of your coworkers. For example, as an administrative
assistant, you may be responsible for screening calls for the person that you support.
You can also have multiple phones that share the same number.
Note
When you share a phone number, you can use that phone line just like any other line. Keep in mind a few
special characteristics about shared lines:
• The shared phone number appears on all phones that share the number.
• Shared lines can barge into an active call:
Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager
18
The shared phone number can be configured to appear on a maximum of 35 devices, including desktop or
mobile app uses by the user.
• If autobarge is enabled, the shared line going off-hook triggers cBarge.
• If autobarge is disabled, the shared line dials **6 to trigger cBarge.
Calls