Meet Me Conference; Start Or Join A Meet Me Conference - Cisco DX80 User Manual

28

Meet Me Conference

Start or Join a Meet Me Conference

Start a Meet Me Conference:
Tap Call, as outlined.
Tap the green Call button.
Join a Meet Me Conference Started by Someone Else:
Dial the Meet Me conference number
that the conference initiator provides.
EFT Draft 1—Cisco Confidential—Do Not Distribute
This will open the Call menu
You have initiated a Meet Me conference.
If you hear a busy tone, the conference
initiator has not joined the conference.
Wait a minute and then try your call again.
Tap Meet Me, as outlined.
About Meet Me
Conference
Meet Me conferencing enables
you to start or join a conference by
calling the conference number as
opposed to call specific recipients
one by one to create a conference.
•
If you call a secure Meet Me
conference number from a
nonsecure phone, your phone
displays the message Device Not
Authorized.
•
A Meet Me conference ends when
all participants hang up.
•
If the conference initiator disconnects,
the conference call continues until all
participants hang up.
Note that the participants cannot
join the conference until the initiator
starts the conference.
D1510401 User Guide
Cisco Collaborate Desk DX80
Produced: April 2014, All contents © 2014
Cisco Systems, Inc. All rights reserved.