Warning; Precautions - Sony RDR-HX900 Operating Instructions Manual

I I_[VlFI
WARNING
To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualified personnel only.
The AC power cord must be
changed only at a qualified
service shop only.
CAUTION
The use ofopfical instnnnents with this
product will increase eye hazard. As
the laser beam used in this DVD
recorder is harmful to eyes. do not
attempt to disassemble file cabinet.
Refer servicing to qualified personnel
only
This symbol is intended
to alert the user to the
presence of uninsulated
"dangerous voltage"
within the producffs
enclosure tl]at may be of s/ifficient
lnagnitude to constitute a risk of
electlic shock to persons
This symbol is intended
to alert the user to the
presence of impollant
operating and
maintenance (selwicing)
instntctions ill the literature
accompanying the appliance
For customers in the U,S.A
Owner's Record
Tb_ model and sezial nmnbms ale located at
the rear of the unit
R_cord th_ serial nmnber in the space
Wovided below Refer m them
whenever ?,ou call upon yotli Son 5, dealm
l_galding tllis product
Model No RDR-HX900
Serial No
CAUTION
You me cautioned that any change or
lnodifications not expressly approved
in this nlanual could void yo/n"
amhority to operate lhis equipment
This equipment has been tested and
found to COlnply with tl]e lilnits for a
Class B digital device, pursuant to Part
t 5 of the FCC Rules These limits me
designed to provide reasonable
protection against harmful interference
in a residemial installation. This
equipment generates, uses, and can
radiate radio fiequency energy and, if
not installed and used in accordance
with the instructions, may cause
harmful interference to radio
con1111/nlIcations However. there is no
guarantee that interference will not
occur in a pmlicular installation If this
equipment does cause harmfii1
interference to radio or television
reception, which can be determined by
turning the equipment off and oil, the
user
is
enco/lraged to tl), to correct the
interference by one or lnore of the
following lneasures:
Reorient or relocate tl]e receiving
antenna.
Increase the separation between the
eqmplnent and receiver.
Connect the equlplnent into an outlet
on a circuit different froln that to
which the receiver is connected.
Consult the dealer or an experienced
radioiTV technician for help
VCR Plus+ and PlusC ode are
registered trademarks of Gemstar
Development Co*porafion The VCR
Plus+ system is manufactured under
license fiOln Gelnstar Development
Corporation
In tl]e United States, TV GUIDE and
other related malks are registered
marks of Gemstar-TV Guide
International, Inc and/or one of l*s
affiliates In Canada, TV GUIDE is a
registered mark of Transconfinemal
Inc, and is used under license by
Gemstar-TV Guide Intemafional, Inc
The TV Guide On Screen system is
manufactured under license from
Gemstar-TV Guide Intemafional, Inc
and/or one of l*s affiliates
The TV Guide On Screen system is
protected by one or more of tl]e
following issued United States patents
6,498,895, 6,418,556. 6.331,877;
6,239.794; 6,154,203; 5,940,073:
4,908,713; 4,751,578; 4,706.121
Precautions
This equiplnent has been tested and
fotmd to comply with the limits set
out in the EMC Directive using a
connection cable shorter than 3
meters.
On safety
Should any solid object or liquid tall
into the cabinet, tmplug the recordel
and have it checked by qualified
personnel before operating it any
fi_rther.
Aboutthe hard disk drive
The hard disk has a high storage
density, which enables long
recording durations and quick
access to the written data. However,
it can easily be damaged by shock,
vibration or dust, and should be kept
away from magnets. To avoid losing
impo*tant data, obse!5,e the
following precautions.
• Do not use the recorder in a place
subject to extleme changes in
temperanu-e (temperanue gradient
less than 10 °C/hour).
• Do not apply a st!ong shock to the
recorder.
• Do not place tl]e recorder in a
location subject to mechanical
vibrations or in an unstable
location.
• Do not place the recorder on top of
a heat source, such as a VCR or
AV amplifie* (receiver).
• Do not move the recorder with its
AC power cord connected.
• Do not move the recorder for one
minute after you have _mplugged
the AC power cord. After one
minute, move the recorder without
shock or vibration.
• Do not disconnect the AC power
cord while the power is on.
• Do not attempt to change the hard
disk. This may result in a
malfunction.
Should the hard disk be damaged,
you cannot recover lost data. The
hard disk is only a tempora* T
storage space.
On placement
• Place the recorder in a location
with adeq_mte ventilation
to