Sony RDR-HX900 Operating Instructions Manual page 17

O Connectingto a video inputjack
Connect the yellow plug of the audio video cord
(supplied) to the yellow (video) jack. You will
enjoy standard quality images.
Note that you cannot use the PROGRESSIVE
button with this connection.
Q Connectingto an S VIDEOinput
jack
Connect an S-video cord (not supplied). Yon will
enjoy high quality images.
Note that you cannot use the PROGRESSIVE
bntton with this connection.
• Connecting to component video
input j acks (Y, PB,PB)
Connect the COMPONENT VIDEO OUT jacks
using a component video cord (not snpplied) or
three video cords (not snpplied) of the same kind
and length. You will enjoy accurate color
reproduction and high quality images.
If yonr TV accepts progressive 480p format
signals, you must use this connection and then
press PROGRESSIVE on the remote to send
progressive video signals. For details, see "Using
the PROGRESSIVE button" (page 18).
Green _ _ Green
Blue Blue
Red Red
When playing "wide screen" images
Some recorded images may not fit your TV
screen. To change the aspect ratio, see page 87.
If you are connecting to a VCR
Connect your VCR to the LINE IN' (VIDEO) jack
on the recorder (page 29).
If your TV has a CONTROL Sjack
You can control the recorder by pointing the
remote at your TV. This feature is convenient
when you place the recorder and the TV away
from each other.
After connecting the recorder to other equipment
in pattern _, _, or _ above, connect the :=
CONTROL S IN jack to your TV's CONTROL S
(OUT) jack using a control S cord (not supplied).
See the instructions supplied with the TV to be
connected. Note that your TV's input will not ._"
automatically switch to this recorder when yon
play a disc. _'
,.,_continued
17