Sony RDR-HX900 Operating Instructions Manual page 78

PressHDDor DVD.
If you select DVD, press A OPENi(LOSE
and place a DVD on the disc tray. Press A
again to close the disc tray.
"_° Hints
• You can tmn off tile lecolder dming dubbing. Tile
recorder completes dubbing even afte! being turned
off.
• You can adjust the settings for the recording picture
betbre recording. See "Adjusting the recording picture
quality and size" (page 51).
I l_I_l
0
/
With the recording side facing down
Wait until "LOAD" disappears from the front
panel display.
If you use an unnsed DVD, forn_atting starts
automatically.
2 Insert the source DY/Digital8format tape
into your digital video camera.
For the recorder to record or edit, yonr digital
video camera must be set to video playback
mode.
3
Press INPUT SELECTon the remote
repeatedly to select "DV."
The front panel display changes as follows:
Channel*...._ kl -_ L2 -_ L3 -_ DV
number
t I
* Does not appear when "Set Top Box Control" is
set to "On"
4 PressRECMODEonthe remoterepeatedly
to select the recording mode.
The recording mode changes as l_llows:
HQ-_ HSP-_ SP-_ kP -_ EP-_ SkP
f I
For details abont the recording mode, see
page 45.
5 PressTOOLSon the remote to select "DVI
D8 AudioInput," andpress ENTER.Then,
select the setting for the audio input.
"Stereol" (defanlt): Records original sound
only. Normally select this when dubbing a DV
format tape.
"Mix": Records both stereo 1 and 2.
"Stereo2": Records additional audio only.
Select "Mix" or "Stereo2" only if you have
added a second audio channel when recording
with your digital video camera.
You are ready to start dubbing. Select one of
the dnbbing methods on the following pages.
• You cannot connect more than one piece of digital
video equipment to the recorder.
• You cannot control the recorder using another device
or another recorder of the same model.
• You cannot record date, time, or the contents of the
cassette memory onto the disc.
• If you record from a DViDigital8 fomlat tape with a
solmd track that is recorded in multiple sampling
frequencies (48 kHz, 44.1 kHz, or 32 kHz), no solmd or
an tmnatmal sotmd will be output when playing back
the sampling fiequency switch point on the disc
• In order to use tiffs recordegs Auto Scene Chaptering
flmction (pages 79, 80), be sme to correctly set the
clock on _ur digital video camera before shooting.
• The recorded pictme may be momentarily affected if
the picture size of the somce image changes, or if there
is nothing recorded on the tape.
RDR-HX90O
2-!87-189-11(2)
78