Sony RDR-HX900 Operating Instructions Manual page 18

Using the PROGRESSIVE button
By using the PROGRESSIVE bntton on the
remote, you can select the signal format in which
the recorder outputs video signals: Interlace or
Progressive.
Connect the recorder using the COMPONENT
VIDEO OUT .jacks (pattern _ above), and press
PROGRESSIVE repeatedly. "PROGRESSIVE"
appears in the front panel display when the
recorder outputs progressive signals.
_Progressive
Select this when:
yonr TV accepts progressive signals, and,
the TV is connected to the COMPONENT
VIDEO OUT jacks.
Note that the pictures wil! not be clear or no
picture will appear if you select pro_essive signal
output when either of the above conditions is not
met.
4.Interlace
Set to this position when:
vour TV does not accept progressive signals, or,
yonr TV is connected to jacks other than the
COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO).
I_I_I
"_° Hint
When you select progressive signal output, you can fine-
lame the signal according to the type of software you are
watching (page 88)
• Consumers should note that not all high definition
television sets are fiflly compatible with this product
and may cause artifacts to be displayed in the pictme.
In the case of 480 prog_ essive scan picture problems, it
is reconnnended that the user switch the cmmection to
the 'standard definition' output. If there are questions
regarding our TV set compatibility with this model
480p DVD recorder, please contact our customer
selvice cenier.
• TV Guide On Screen does not appear if you connect
yore TV using the video or S-video jacks and press the
PROGRESSIVE button on the remote, even if your TV
accepts progressive signals
18