Sony RDR-HX900 Operating Instructions Manual page 99

Recordingdoesnotstartimmediately after you
press • REC.
Operate the recorder only after "LOAD"
"FORMAT." or "INFOWRITE" disappears
from the front panel display.
Nothing was recordedeven thoughyou set the
timer setting correctly.
There was a power lhilure dttring recording.
The recorder's internal clock stopped due to a
power ihiktre that lasted for more than one hour.
Reset the clock (page 86).
The channel was hidden after the timer recording
was set. (See "To customize the channel line-up"
on page 36.)
Disconnect the AC power cord from the AC
outlet, and comlect it again.
The program contains copy protection signals
that restrict copying.
The timer setting overlapped another setting that
was set later.
"_ There is no DVD inside the recorder.
There is not enough HDD or DVD disc space i\)r
the recording.
The set top box was tunled oft'.
The set top box controller was incorrectly
connected (page 13).
The settings in "get Top Box Control" in Settings
getup have been changed (page 86).
A separate recording was in the process of being
made without the use of the timer (page 50).
The recorder was in the wocess of dubbing
(HDD+-+DVD).
The recorder was in the process of DV Digital8
Dubbing.
Recordingdoesnotstop immediatelyafter you
press• RECSTOP.
It will take a few seconds for the recorder to input
disc data before recording can stop.
Recordingdoes notstop after you press•
STOP.
Open the remote's cover and press • REC
STOP.
Timer recordingis notcompleteor did notstart
from the beginning.
There was a power t'ailure during recording.
Should the power t;ailm-e continue for more than
one hour, reset the clock (page 86).
There is not enough HDD or DVD disc space for
the recording.
Contentspreviously recordedwere erased.
Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
"Amo Title Erase" in Features getup is set to
"On" (page 93).
Display
The clockhas stopped.
"_ get the clock again (page 86).
The clock stopped clue to a power failm-e that
lasted for more than one hour. Reset the clock
(page 86).
The clockis wrong.
Set the clock again (page 86). If you cannot
select "Clock" from "Settings" in the getup
Display, wait until the clock data is received and
the clock is automatically adjusted.
The TIMER REC indicator is flashing.
The disc does not have enough space.
Inselt a recordable disc inside the recorder.
The recordingmode indication is incorrect.
When the recording or dubbing is less than three __2
minutes, the recording mode indication may be
displayedincorrectly. The actual recording itself --
=_,
is correctly made in the selected recording mode. o
The clockdoes not appear in the front panel
display.
"Dimlner" in Options getup is set to "Power
gave" (page 94).
Remote control
g
The remote does notfunction.
Batteries are weak.
The remote is too tar from the recorder.
The remote's manut:acturer code returned to the
default setting when you replaced the batteries.
Reset the code (page 2t).
"_ Turn on the recorder.
The remote is not pointed at the remote sensor on
the recorder.
Different command 1nodes are set for the
recorder and remote, get the same command
mode (page 23).
,,,*oo_t_,_uoa 99