Sony RDR-HX900 Operating Instructions Manual page 90

Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the andio output level
This ftmction affects the ot'4pt'4 of the lbllowing
jacks:
LINE OUT (AUDIO LR) 12 jacks
On Select this when the
playback sound from the
speakers is distorted.
Off Nom_ally select this
position.
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is tnrned
down when playing a DVD that conforms to
"Audio DR(?." This affects the outpnt from the
/bllowing jacks:
LINE OUT (AUDIO L'R) 12 jacks
DIGITAL OUT (OPTICAL or COAXIAL)jack
only when "Dolby Digital" is set to "D-PCM."
Standard
TV Mode
Nol]nally select this
position.
Makes low sounds clear
even if you turn the volume
down.
Wide Gives you the feeling of
Range being at a live perl\_rmance.
Downmix (DVDs only)
Switches the method _r mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "Checking the Play Information
and Playing Time" (page 41). This function
affects the output of the following jacks:
LINE OUT (AUDIO L'R) 12 jacks
DIGITAL OUT (OPTICAL or COAXIAL)jack
when "Dolby Digital" is set to "D-PCM."
Dotby
Surround
Normal
Normally select this
position.
Multi-channel audio signals
are output to two channels
for er[ioying surround
sounds.
Multi-channel audio signals
are dox_mnixed to tx_o
channels for use with your
stereo.
Digital Out
Selects if audio signals are ontput via the
DIGITAL OUT (OPTICAL or COAXIAL)jacks.
On
Normally select this
position. \\_en you select
"On," see "To set the digital
output signal" l\_r fmther
settings.
Off The influence of the digital
circuit upon the analog
circuit is minimal.
4l, T o set the digital output signal
The following setup items switch the method of
ontputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see "Connecting the Andio
Cords" (page 19).
Select "Dolby Digital" and "DTS" after setting
"Digital Out" to "On."
!i!!i_!i!i!_!_! SETU_
On
M_in
Audio AL_di_ '.,TT Off _"
S_a_dard 4_
_D_lby Surroun_
'1
off 4_
90