Sony RDR-HX900 Operating Instructions Manual page 94

Disc and Remote Control
Settings/Factory Settings
(Options)
The Options Setup allows you to set up other
operational settings.
1
PressSYSTEMMENUwhile the recorderis
in stop mode.
2 Select"SETUP," and pressENTER.
3
Select"Options," and pressENTER.
The Options Setup appears with the fbllowmg
options. The default settings are underlined.
Options F_ctor_ S_tu_
Format DVD (DVD-RW only)
The recorder automatically starts fomlatting in
VR mode or Video mode, whichever is selected
below, when a new, untbnnatted DVD-RW is
inserted.
VR Automatically formats the
disc in VR mode.
Video
Automatically l\_rlnats the
disc in Video mode.
Dimmer
Adjusts the lighting of the front panel display.
Bright lighting.
Normal
Power
Save
Lox_ lighting. Turns off the
lighting when the pox_ er is
off.
Auto Display
On Amomatically displays
inf\_rlnation on the screen
when the recorder is turned
o1:. etc.
Off
Displays inf\_rlnation only
when DISPLAY is pressed.
Command Mode
(hanges the Command Mode of the recorder if
other DVD eqnipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Son?,: DVD
player or more than one Sony DVD recorder" on
page 23.
DVD! Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD2 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD3 The default Command Mode
of the recorder.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1 After step 3 above, select"Factory Setup,"
and press _ or ENTER.
The display for selecting a group of settings
appears.
S elect the group of settings you want to return
to defanh from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press _ or ENTER.
Select "Start," and press ENTER.
The selected settings return to their defauh
settings.
4 Press ENTER when"Finish" appears.
94