Sony RDR-HX900 Operating Instructions Manual page 30

• When you connect using a component video cord, connect the audio cords to the LINE IN jacks.
• Do not connect a hi-definition ttmer or sinfilar device using tile component video cords This recorder only accepts
standard definition interlace signals.
Connecting to the LINE 2 IN jacks on the front panel
( onnect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the equipment has
an S-video jack, you can use an S-video cord instead of an audio/video cord.
VCR, etc
OUTPUT
S VIDEO
VIDEO F AUDIO
I
L R
Audio/video cord
(not supplied)
IT;2T;2_I[;::, : Signal flow
"_° Hint
When the connected equipment otttptlts only monaural sound use audio cables that distlibute monamal sounds to le:[V
right channels (not supplied).
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying caimot be recorded
30