Table of Contents
Advertisement
Chapter 2 Preparations
6. Install riser card.
When installing the card, position the terminal part of the PCI card to the riser card slot and insert it.
7. Fix the PCI card with the screw you removed in Step 5.
8. Connect the riser card C to the mother
board slot. Fix the riser card with three
screws you have removed in Step 3.
When connecting the card, position the
terminal part of the card to the slot on the
motherboard and insert it.
9. Connect the riser card B to the mother
board slot. Fix the riser card with three
screws you have removed in Step 2.
When connecting the card, position the
terminal part of the card to the slot on the
motherboard and insert it.
Important
Do not touch the terminal part of riser cards or PCI cards and the signal pins
of electric parts installed on the card. Installing cards with dirt or oil can
cause malfunction.
• Make sure that the head of a PCI card bracket is seated into the fixed slot.
Note
• Depending on type of PCI cards, the terminal part of the PCI card may be too
large to fit in the connector.
• If you have trouble installing the card, remove the card once and try again. If you
apply excessive pressure on the card, a PCI card or riser card might break.
Tips
Connect a cable between connector on motherboard and PCI card before
installing the riser card to the server.
Express5800/R120d-1E User's Guide
1. Installing Internal Optional Devices
Screws
Screws
95
Advertisement
Table of Contents
