Prerequisites For The Location Of Use; Unpacking And Checking The Equipment Supplied; Mounting And Disassembly - Eaton ESR5-NO-31-24VDC Manual

3.1 Prerequisites for the location of use

3.2 Unpacking and checking the equipment supplied

3.3 Mounting and disassembly

▶8. If carrying out work that involves more than one worker, make abso-
lutely sure that nobody is still in the danger zone
The supply voltage must be guaranteed and must conform to the relevant
specifications-
The devices are intended to be flush mounted in control cabinets, control
panels, service distribution boards, or control consoles on a mounting rail.
The device can be installed in a horizontal or vertical position.
The device is delivered in a package together with the document
IL049014ZU.
• Check the ESR5-NO-31-24VDC's packaging for transit damage.
• Carefully remove the packaging in order to avoid damaging the device.
• Check the package contents for visible transit damage.
• Keep the original packaging so that you will be able to use it in the future
if you need to transport or ship the device.
• Carefully read the document IL049014ZU
• Make sure to also keep the document IL049014ZU and/or to give them
to the end customer.
Missing parts or damage
If you notice anything wrong, please contact your distributor or Eaton Service
+1 877-386-2273 (en) / 877-ETN-CARE (877-386-2273).
▶ Mount the device on a 35 mm mounting rail according to EN 60715.
▶ To remove it, release the locking base with a screwdriver.
B
A
Figure 12: Mounting A and disassembly B
ESR5-NO-31-24VDC 11/23 MN049018EN Eaton.com
2
1
3 Installation
24