Ir Remote - Monoprice BLACKBIRD 44556 User Manual

Rear Panel
TX RX
TCP/IP RS-232
2
1
No. Name
TCP/IP
1
RS-232
2
IR EXT
3
HDMI INPUT
4
HDMI
5
OUTPUT
6 DC 12V

5. IR Remote

IR EXT HD 1 HD 2
3
The link port for TCP/IP control, connected to an active Ethernet
link with an RJ45 cable to control the Matrix via Web.
RS-232 serial command control port, connected to a PC or control
system to control the Matrix.
If the IR receiver window of the unit is blocked or the unit is
installed in a closed area out of infrared line of sight, the IR
receiver cable can be inserted to the "IR EXT" port to receive the
IR remote signal.
HDMI signal input port, connected to signal source device.
HDMI signal output port, connected to HDMI display device.
DC 12V/2.5A power input port.
Power on or Standby:
Power on the Matrix or set it to standby mode.
INFO:
Press this button to display the serial port baud rate
and IP address in the upper right corner of the screen.
(The information will disappear after 5 seconds.)
INPUT 1/2/3/4:
◀ ▶:
Press these buttons to select the input source.
Select the last or next input source.
INPUT
HD 3 HD 4
4
Function Description
6
HD 1 HD 2 HD 3
5
OUTPUT
HD 4 DC 12V
6