Monoprice BLACKBIRD 44556 User Manual page 12

Input Page
You can do the following operations on the Input page:
1. Inputs: Input channel of the device.
2. Active: It indicates whether the channel is connected to a signal source.
When the input port is connected to the signal, it shows green, otherwise, it
shows gray.
3. Name: The input channel's name. You can modify it by entering the
corresponding name (max length: 31 characters for English and 15 characters
for Chinese) in the input box. Chinese name is unsupported when the
language is English; and when the language is Chinese, both English and
Chinese name are available.
4. EDID: You can set the current channel's EDID. Click drop-down list to select.
5. Load EDID to user memory: Set EDID for the User.
Click the "Browse" button, then select the bin file. If you select the wrong EDID
file, there will be a prompt, as shown in the following figure:
Make sure to select the correct file, then you can check the name of the selected
file. Select "User 1" or "User 2", then click "Upload". After successful setting, it will
prompt as follows:
12