Monoprice BLACKBIRD 44556 User Manual page 10

Step 1
Get the current IP Address.
The default IP address is 192.168.0.100. You can get the current Matrix IP address
in two ways:
The first way 1: You can get the IP address via panel buttons. On the initial
OLED display, press the "MENU" button three times to enter the IP interface
and check the current IP address.
The second way 2: You can get the IP address is via RS-232 control. Send the
ASCII command "r ip addr!" through a Serial Command tool, then you'll get the
feedback information as shown below:
IP:192.168.0.100 in the above figure is the current Matrix IP address (this IP
address is variable, depending on what the specific machine returns).
For the details of RS-232 control, please refer to "RS-232 Control Command".
Step 2
Connect the TCP/IP port of the Matrix to a PC with an UTP cable (as shown in
the following figure), and set the IP address of the PC to be in the same
network segment with the Matrix.
Step 3
Input the current IP address of Matrix into your browser on the PC to enter
Web GUI page.
10
PC