Table of Contents
Advertisement
OPERATION
The connected light/device can be turned on in two ways:
1.
Using a Z-Wave® controller or remote
2.
Manually using the paddle on the switch
Remote Operation
Z-Wave remotes provide control of an individual device, groups
of devices, and scenes. Some brands of Z-Wave certified remotes
may not offer as much flexibility in how you can set up your
lighting control network. Please refer to your controller's
instructions for details on its capabilities and instructions for
adding and controlling devices.
Manual Operation
Momentarily press the top of the paddle to turn on the
connected device.
Momentarily press the bottom of the paddle to turn off
the connected device.
Press and hold the top or bottom of the paddle for 1.5
seconds to turn on the nodes of association group 3.
Press and hold the top or bottom of the paddle for 1.5
seconds to turn off the nodes of association group 3.
10
Advertisement
Table of Contents
