Using Short-Cut Dialing Methods; Using Call Records; Using Redial; Using Speed Dialing - VTech VT 9125 User Manual

USING SHORT-CUT DIALING METHODS

USING CALL RECORDS

See Dialing From Call Recordson page 14.

USING REDIAL

Redial is a fast method of calling the last number that you dialed. This feature works
whether you dialed it manually, or it was from a call record or the speed dial list.
1. Press .
REDIAL
The last telephone number you called is shown on the
display.
2. Verify the correct number.
PHONE
3. Press to dial the telephone number.
FLASH
The channel number, the call timer, and the telephone
number are displayed on the screen.

USING SPEED DIALING

Another short-cut for dialing is using speed dialing. You need to create a speed dial
list before using this procedure. See
1. Press .
MEM
2. Press or
TONE
Or, e nter the memory location number (1 - 9) using the
keypad. The display shows the telephone number stored.
3. Verify the correct number.
PHONE
4. Press .
FLASH
See also Speed Dialing In A Chain

STORING YOUR SPEED DIAL LIST

You can create a new entry or transfer a
List. You can store up to 9 speed dial names and numbers in memory.
STORING A NEW ENTRY
1. Enter the telephone number. You can enter up to 16
characters maximum. You can also program pauses
using . If you make a mistake, press
REDIAL
a digit, or press
2. Press and hold
the name.
Go to step 5 if you do not enter name.
Storing
to scroll the list.
on page 18.
to clear the number.
OFF
until the display asks you to enter
MEM
Using Short-cut Dialing Methods
your Speed Dial List
Caller ID call record into your Speed Dial
to erase
DELETE
- 9 -
below.