Operating Your Phone
OPERATING YOUR PHONE
DIALING
This telephone lets you make calls using traditional or short-cut dialing methods.
USING TRADITIONAL DIALING
PHONE
1. Press
on the handset. The PHONE button becomes
FLASH
lit.
The channel number and the call timer are shown on the
display.
2. Use the number pad to dial the phone number.
The phone number appears on the display as you enter
the number. You also hear beeps for each digit as you
dial.
3. Listen for a connection.
4. Press
to end your call or replace the handset on the base.
OFF
USING PRE-DIAL
The Pre-Dial Feature allows you to enter a telephone number and verify it on the
display before you place the call. You can enter up to 16 digits in the display.
1. Enter the telephone number using the keypad. The
telephone number appears on the display as entered.
2. Verify the correct number.
If you make a mistake, press
number.
PHONE
3. Press
to dial the telephone number.
FLASH
The channel
number, the call timer, and the telephone
number are displayed on the screen.
4. Press
to end your call or replace the handset on the
OFF
base.
When another phone connected to the same line is in use,
you can tell from a message on the display before you use
the phone.
to erase a digit, or press
DELETE
- 8 -
to clear the
OFF