Step 4. Select Tone Or Pulse Service; Step 5. Set Ringer On Or Off; Step 6. Select Prompt Language - VTech VT 9125 User Manual

CAUTION
Risk of explosion if battery is replaced by an incorrect type.
To reduce the risk of fire or injury to persons or damage to the phone, replace
only with battery NP 600, B-650 or 3N-600AACL in this phone. Do not attempt
to open the sealed battery pack. All used Ni - Cad batteries must be recycled
or disposed of properly in accordance with all applicable laws.

STEP 4. SELECT TONE OR PULSE SERVICE

You can set the telephone to use either tone or
rotary / pulse service. Move the switch on the base
to match the service you have.

STEP 5. SET RINGER ON OR OFF

CID
1. Press ,
The display shows the current ringer setting.
2. Press to change the setting if desired.
TONE
Otherwise go to step 3.
3. Press to accept the setting.
MEM
See also Setting Up VIP Distinctive Ring

STEP 6. SELECT PROMPT LANGUAGE

1. Press , then
CID
2. Press once.
TONE
2
3. Press to check the language selected.
ABC
4. Press to change the setting if desired.
TONE
Otherwise go to step 5.
5. Press to accept the setting.
MEM
1
, then .
MEM
.
MEM
Step 4. Select Tone or Pulse Service
on page 17.
- 7 -
PULSE TONE