GREE ELECTRIC GWH07AGA-K6DNA1A/O Service Manual page 122

Service Manual
Step
7. Remove evaporator assy
a Remove 2 screws fixing evaporator assy.
At the back of the unit, Loosen the clasp of the
b
connection pipe clamp and then remove the connection
pipe clamp.
First remove the left side of evaporator from the groove
c
of bottom shell and then remove the right side from the
clasp on the bottom shell.
Adjust the position of connection pipe on evaporator
slightly and then lift the evaporator upwards to remove
d it.
Installation and Maintenance
Procedure
Screws
Clasp
Connection pipe
Connection pipe clamp
119